Frequently Asked Questions (FAQs)

Any high-quality 4K Android satellite receiver or Android TV box with enough RAM/CPU and stable network chip is suitable. StarSat and Mediastar Android 4K models sold by GloriousStore are commonly used for Indian IPTV apps.

DD FreeDish is primarily targeted at India, and its beam is not optimized for UAE. As a result, the signal is extremely weak or unavailable in many UAE locations, even with large dishes. IPTV/OTT is more practical for Indian FTA content in UAE.

Most Indian channels in UAE are available through IPTV and official streaming apps rather than free satellite. A hybrid receiver or smart TV app connected to a reliable Indian OTT or IPTV service is usually the best solution.

If PTV Sports does not lock, check that frequency, symbol rate, polarization, and FEC are entered correctly. Weak footprint, wrong dish alignment, or outdated LNB can also prevent a stable lock.

Biss-encrypted channels require valid keys entered via the receiver’s softcam/key editor. Keys change periodically and must be obtained from legitimate sources where allowed. Always respect local law and copyright rules.

Yahsat and certain Arabsat/Nilesat beams carry Pakistani content that can be received in Saudi Arabia with the right dish size. IPTV is another strong option when satellite beams are weak.

PTV channels may have changed transponder, encryption, or footprint. If your dish and receiver are still set to old parameters, they will not open. Check latest frequencies or use IPTV, which is often more stable for PTV in UAE.

You can receive Pakistani channels through satellites like Yahsat (with correct dish and frequency) or via IPTV services. Hybrid receivers combine both methods so you can switch between dish and internet streams easily.

LNBs designed for desert climates feature UV-resistant plastic, sealed electronics, low noise figure, and very stable local oscillators. Choosing such an LNB greatly improves reliability in hot, dusty environments.

High temperatures stress the CPU, tuner, and power supply, causing instability and freezes. Dust buildup, blocked vents, and cheap power adapters make the problem worse. Keeping the receiver cool and clean is critical in GCC climates.

beIN channels are heavily encrypted and paired with official receivers and smart cards. Normal FTA receivers cannot decrypt them legally, so they will appear as scrambled or black screens.

Oman lies toward the edge of Nilesat’s coverage map, so received power is lower. Larger dishes and high-sensitivity LNBs are needed for consistent reception, especially during bad weather.

For most GCC countries, a 90–120 cm dish is sufficient for Arabsat and many Nilesat transponders. Edge areas or weak beams may require 120–150 cm. Always confirm with local installers for your city.

Arabsat/Badr 26E and Nilesat 7W/8W are the primary satellites for Arabic content in the Middle East. Yahsat and Hotbird add international and specialty channels, depending on dish size and location.

Tabuk is farther from the center of Nilesat’s coverage, so signal strength is lower. Jeddah, closer to the main beam, receives stronger signals. In Tabuk you may need a larger dish and very precise alignment.

As temperature drops and humidity rises in the evening, small changes in dish alignment, metal contraction, and atmospheric conditions can reduce signal margin if the alignment is already marginal. Fine-tuning often fixes this.

Nilesat transponders change over time, and the latest active ones should always be checked on up-to-date frequency lists or from reliable satellite tracking sites. Your receiver’s blind scan function can also discover new or changed transponders automatically.

0% quality indicates the tuner does not see a valid digital signal at that frequency and polarization. Causes include wrong satellite selection, incorrect parameters, dish misalignment, faulty LNB, or broken cable. Strength may show some RF, but without proper quality the receiver cannot lock.

Strong transponders differ by satellite, but generally those with higher symbol rates and robust FEC values provide better stability. Installers in UAE often use one or two known ‘reference’ frequencies on each satellite to peak the dish for maximum quality.

Yes. Every meter of coaxial cable introduces a small amount of attenuation; long runs significantly weaken the high-frequency satellite signal. To preserve margin, keep cables as short as practical, avoid unnecessary joins, and use RG6/RG11 with low loss per meter.

In Dubai’s climate, use RG6 or RG11 cable with solid copper conductor, double or quad shielding, and UV-resistant outer jacket. Cheaper copper-clad steel or thin indoor-rated cables degrade quickly under strong sun and high temperatures.

Coaxial cable carries very high-frequency Ku-band signals. Poor-quality or old cables have higher attenuation, bad shielding, and sometimes corrosion inside, which introduces noise and reduces the signal reaching your receiver. For satellite systems in UAE/KSA, always use high-quality RG6 or RG11 with copper core and proper connectors.

The elevation angle varies by city: in northern KSA it is lower, and in southern regions slightly higher. Use a satellite calculator app with your GPS coordinates to get the exact angle, then adjust the dish until the receiver shows peak signal quality on a known Nilesat transponder.

First set the motor mount to true south according to your longitude and adjust the dish elevation per motor instructions. Then configure USALS in the receiver with accurate latitude/longitude. The motor will move to each satellite automatically, and you can fine-tune if small errors remain.

Nilesat skew in Dubai is usually a few degrees from vertical (exact value depends on your exact location). Installers use signal quality as the final judge: rotate the LNB slowly until the quality on a strong Nilesat transponder reaches its maximum, then tighten the clamp.

Once the dish is aligned in azimuth and elevation, loosen the LNB clamp slightly and rotate the LNB a few degrees clockwise or counter-clockwise while watching signal quality on the receiver. The correct skew is the angle where quality peaks for your main satellite.

Check if your internet is working on other devices first. Then verify the IPTV portal URL, username/password, and that the server is online. Sometimes portals change domain, so you may need the latest URL from your provider.

A fixed disconnect interval can be caused by server session limits, app bugs, or router idle-timeout settings. Check another device on the same service; if the same timing occurs, it is likely the IPTV provider or router configuration, not the receiver itself.

Sometimes a VPN can improve IPTV by routing traffic through less congested paths, especially if your ISP throttles certain IP ranges. However, VPN also adds overhead and can reduce speed, so it must be tested case-by-case.

On most StarSat receivers, go to Menu → Installation → Transponder List → Add/Edit, then enter frequency, symbol rate, polarization, and FEC. After saving, perform a scan on that transponder or on the entire satellite.

If the front panel only shows “ON” and does not boot, the firmware or bootloader may be corrupted. In many cases you can recover it by flashing the correct firmware via USB or RS232 recovery tools. Using wrong firmware or power interruption during upgrade is the common cause.

Firmware updates can fail if the file does not match the exact model, the USB drive is not FAT32, the file is corrupted, or power is unstable during flashing. Always confirm model number, redownload firmware, use a small FAT32 USB, and avoid touching cables while updating.

If USB upgrade menu shows no file, the drive may be formatted as NTFS/exFAT, the file is in a subfolder, or the filename extension is wrong. Format the USB to FAT32, place the firmware in the root directory, and reconnect it to the front panel USB port.

Rebooting mid-update usually indicates power fluctuation, overheating, or a serious firmware conflict. This can brick the receiver. Use a stable power source and do not use extension leads with poor contact during firmware upgrades.

“ASH” or similar boot errors often mean the bootloader is damaged. Recovery typically requires loading a clean firmware through RS232 serial tools or a special recovery loader from the brand. In difficult cases, professional service may be necessary.

If IPTV runs smoothly on your phone but buffers or fails on the receiver, the issue is usually with the receiver’s network chip, Wi-Fi signal, or app configuration. Test with LAN cable directly to the router; if it works then, the Wi-Fi link or receiver settings were the problem.

If the mount is not firmly fixed or bolts are slightly loose, strong wind can gradually move the dish off its optimal angle. Heavy-duty mounts and proper tightening, plus using solid dishes, help prevent drift.

STC doesn’t block all IPTV, but certain ports or servers may be throttled or deprioritized. Many IPTV services still work well on STC when they are optimized for Gulf routing and the user connects via wired LAN.

Buffering in Riyadh is often due to server routing and congestion, not your speed. If speed tests look good but IPTV lags, the provider’s server might be overloaded or poorly routed. LAN connection and better providers can fix it.

Hybrid 4K receivers with powerful CPUs, HEVC, and good app support work best in KSA. Look for latest-generation StarSat, Mediastar, or Tiger models that are known for stable IPTV performance on STC, Mobily, or Zain connections.

For Nilesat and Arabsat from Jeddah, the dish generally faces toward the southwestern sky. Exact azimuth/elevation can be obtained from satellite finder apps, and small adjustments must be made based on signal quality readings.

Use the calculated azimuth and elevation for your city, roughly point the dish in that direction, then fine-tune while monitoring a strong Nilesat transponder on your receiver. Adjust skew last for maximum quality and tighten all bolts.

Costs vary by city, dish size, and installation difficulty. Simple single-satellite installations are cheaper, while multi-LNB or motorized systems cost more. Ask for a quote including dish, LNB, cable, and labor.

Local satellite shops, independent technicians, and some electronics chains offer installation in Riyadh. Choose installers with good reviews who understand correct grounding, cable routing, and multi-satellite setups.

Arabsat/Badr’s beams are specifically designed to cover the Arabian Peninsula, so EIRP (signal power) is usually higher over Saudi Arabia compared to Nilesat. This is why channels on Arabsat often appear more stable, especially with smaller dishes.

Some IPTV URLs may perform poorly on specific ISPs due to routing decisions. Mobily users often see improvement by changing DNS, using alternative portals from their provider, or switching to more optimized IPTV servers.

If IPTV consistently disconnects at certain times, it may be related to peak congestion or scheduled server restarts, not prayer time itself. Check if other internet services slow down at the same time; if yes, it is likely a network load issue.

Religious channels can move between satellites, change frequency, or become encrypted. A fresh blind scan on the correct satellite often restores them; if not, check updated frequency lists or IPTV alternatives.

No Signal in KSA usually points to misaligned dish, faulty LNB, damaged cable, or selecting the wrong satellite/transponder. Sand, rust, or loose bolts can also shift dish alignment after storms and sandstorms.

Yes, Mediastar receivers are popular in Saudi Arabia for their strong CPU performance and IPTV capabilities. As with any brand, reliability depends on using original units, updated firmware, and proper cooling.

Current-generation Tiger 4K and HD models with HEVC and IPTV support are widely used across Saudi Arabia. Exact popular models change over time, but customers typically choose those with regular firmware updates and strong tuner reputation.

The SR-9090 Extreme is considered one of the strongest StarSat tuners, capable of locking weaker transponders more easily. Its powerful processor and advanced firmware make it well suited for demanding KSA environments.

Yes. It supports DVB-S2X, HEVC, and 4K output, and works reliably with Arabsat and Nilesat when paired with a properly aligned dish and quality LNB. Many KSA users choose it as a balanced mid-to-high range receiver.

StarSat SR-260H4K, SR-9090 Extreme, and other Extreme-series models are popular in KSA because they handle Arabsat/Nilesat well, offer 4K and IPTV, and are designed with Middle East users in mind.

Choose providers with servers hosted in or near the Middle East and good reputation for Arabic channel stability. Avoid very cheap, over-sold services that often buffer and cut channels frequently.

Some content is geo-restricted or not carried by the satellite beams covering Saudi Arabia. Additionally, encrypted channels require subscriptions and cannot be opened on generic FTA receivers.

Arabsat/Badr 26E and Nilesat 7W/8W are the most commonly used in Saudi Arabia. Additional satellites like Eutelsat at 7/8W or 13E may be received depending on dish size and region.

Many Indian channels are now delivered via IPTV or satellites whose beams do not cover the UAE strongly. If your satellite platform loses rights or changes footprint, these channels may disappear. In most cases, IPTV or legal OTT apps are a more reliable way to watch Indian content in UAE.

In UAE this usually means the channel is encrypted and your receiver does not have the valid subscription, softcam, or decryption system. On free-to-air channels it can also mean you are tuned to the wrong frequency or satellite. Check that the channel is truly FTA, confirm settings, and keep firmware updated.

The SR-260H4K supports DVB-S2/S2X and can receive all major Ku-band satellites used in the UAE (Nilesat, Badr/Arabsat, Yahsat, etc.), provided your dish and LNB are correctly installed and switched via DiSEqC.

Yes, the StarSat SR-9090 Extreme is known for a strong, sensitive tuner that locks weak Nilesat and regional beams more easily than many basic receivers. It also offers powerful 4K/IPTV features, making it a solid premium choice for UAE users.

Humax receivers with DVB-S2 tuners can be connected to the DU dish’s LNB output as long as frequency settings and DiSEqC configuration match the satellite used by DU. Some DU services, however, may use conditional access that requires their own receiver for encrypted channels.

Mediastar receivers themselves are just hardware and are legal to own and use as satellite/IPTV receivers. What matters is how they are used; always respect copyright and local content regulations and avoid illegal piracy servers.

Tiger 4K and high-end HD models with HEVC and strong tuners perform well in UAE for both dish and IPTV usage. Choose a current-generation model with regular firmware updates and good local support.

For Dubai, models like StarSat SR-260H4K and SR-9090 Extreme are highly recommended. They combine strong satellite tuner sensitivity for Nilesat/Badr with robust 4K and IPTV performance, and they withstand high rooftop temperatures when installed correctly.

For a single HD stream, 10 Mbps stable speed is usually enough; for 4K, 25 Mbps per stream is recommended. In practice, a 50 Mbps+ fiber connection with low jitter and wired LAN gives the best experience, especially when multiple devices share the same line.

Use wired LAN instead of Wi-Fi, choose lower resolution (e.g., 720p instead of 4K), change DNS to fast public resolvers, and ask your IPTV provider for alternative portals or backup servers. Good routing and a stable server often remove the need for VPN.

Individual streams may be down, geo-blocked, or overloaded. Sometimes the provider disables certain channels due to rights issues. If only a few channels fail while others work fine, the issue is usually on the IPTV server side—not with your receiver or internet line.

DU can also shape or slow some international streaming routes. IPTV performance depends on server location and routing. Many customers still use IPTV successfully with DU when they choose optimized servers and use LAN instead of congested Wi-Fi.

Etisalat may throttle certain unlicensed IPTV ports or routes during peak times, which feels like buffering. However, they do not block all IPTV. Using reliable servers, proper DNS, and wired LAN can greatly improve performance.

Android-based 4K receivers with fast processors (quad-core or higher), at least 2 GB RAM, and good network chips handle IPTV servers best. StarSat, Mediastar, and Tiger hybrid receivers sold by GloriousStore are optimized for such usage when paired with a stable fiber connection.

Even with fast fiber, IPTV can buffer due to server overload, high ping, packet loss, or Wi-Fi interference. Peak evening usage often reveals routing bottlenecks. Using wired LAN instead of Wi-Fi, lowering stream quality slightly, and choosing a better provider usually fixes most buffering problems.

The best IPTV services in UAE are those with servers close to the region, optimized routing to Etisalat/DU networks, and stable apps. For legal and reliable performance, always choose reputable IPTV providers and avoid over-subscribed cheap services that buffer during evenings.

Policies differ by building. Some allow small balcony dishes; others require installation on shared rooftops only. Always check with building management or owners’ association to avoid violations, and where possible use neat, non-intrusive installations.

If you cannot lock Nilesat, common causes are incorrect azimuth/elevation, wrong LNB skew, insufficient dish size, obstructions (buildings, walls), or defective LNB/cable. Because Nilesat is weak in UAE, a precise alignment and at least 100–120 cm dish are very important.

beIN Sports is a subscription service with strong encryption and normally requires an official beIN decoder and smart card. Generic FTA receivers usually cannot open these channels legally. If you used to receive them via a third-party method, it may have been blocked by updated encryption.

High internal temperature can cause the CPU or power supply to protect itself by shutting down or rebooting. Place the receiver in a well-ventilated area, avoid stacking other devices on top, and ensure that vents are not blocked. Cheap power adapters can also become unstable in UAE heat and should be replaced with quality units.

Afternoon heat expands dish metal and support arms slightly, changing the focal point. LNB oscillators also drift with temperature. If your alignment is marginal, these small changes are enough to reduce SNR. Fine-tuning and using quality hardware improves stability.

As in UAE, choose a universal Ku-band LNB with low noise figure, very stable LO, and UV-resistant body. Desert-rated LNBs are designed to handle the extreme temperatures seen in many parts of Saudi Arabia.

Northern cities sit closer to the outer edge of Nilesat’s beam. As you move away from the center of coverage, signal power drops, which is why larger dishes and high-quality LNBs are required in northern regions.

Nilesat’s footprint generally provides slightly stronger signal in western regions like Jeddah compared to some northern or eastern areas. However, with the right dish size and precise alignment, both Riyadh and Jeddah can receive Nilesat reliably.

Central and southern KSA locations usually receive Nilesat well with 90–120 cm dishes, while northern regions (like Tabuk) may need 120–150 cm for stable HD reception. Local installers can advise based on your exact city.

Pakistani channels in KSA can be watched via Yahsat or IPTV services. A hybrid 4K receiver that supports both dish and IPTV gives you the widest selection and better long-term flexibility.

Most Egyptian channels broadcast on Nilesat and Arabsat. A receiver with sensitive tuner, HEVC, and stable firmware—such as StarSat or Mediastar models—combined with proper dish alignment will work well for Egyptian channels.

Sudanese channels are often carried on specific Arabsat or Nilesat transponders. Any good DVB-S2 receiver with blind scan can receive them as long as the dish is correctly aligned. For extra flexibility, a hybrid receiver adds IPTV options for Sudanese content.

Because Nilesat coverage changes across Saudi Arabia, choose a receiver with a strong tuner and good error correction (DVB-S2X). Combined with a sufficiently large dish, these receivers lock more Nilesat transponders with fewer dropouts.

Desert areas have extreme heat and sometimes longer cable runs. A receiver with sensitive tuner, high-quality LNB, and good power margin on the dish size gives more stable signal. High-end StarSat, Mediastar, and Tiger models are recommended for such conditions.

Hybrid receivers with Android OS, DVB-S2/S2X tuner, and strong CPU are ideal for KSA users who watch both dish and IPTV. Look for 4K units with at least 2 GB RAM, HEVC, and regular software updates from the manufacturer.

StarSat receivers are available from authorized dealers and reputable electronics shops throughout Saudi Arabia and through trusted online stores. Always check for importer’s warranty stickers and avoid unbranded or suspiciously cheap units.

Residents in Makkah and Medina often use Arabsat/Badr and Nilesat. A receiver with strong tuner, DVB-S2X, and HEVC support such as newer StarSat or Mediastar devices will give best results, especially when paired with a properly aligned dish.

Riyadh experiences extreme heat and dust, so choose a receiver with good ventilation, quality power supply, and proven reliability. StarSat SR-9090 Extreme and similar premium models are known to handle Riyadh conditions well when installed correctly.

In KSA, you need receivers that handle high temperatures and work well with Arabsat/Badr and Nilesat. StarSat Extreme series, Mediastar 4K models, and high-end Tiger receivers are widely used due to strong tuners and good IPTV performance.

If your dish is pointed to Hotbird but you get no channels, the dish may actually be aligned to the wrong orbital slot, or the signal is too weak for your dish size in UAE. Many Hotbird beams are not intended for GCC, so only very large dishes can receive them. In apartments with small dishes, Hotbird is usually not practical.

Evening is peak internet time, so congestion and server overload are more common. If IPTV works well in the morning but freezes at night, the issue is usually your provider’s server or route, not the receiver. Using a wired connection and asking the provider for a better line/server often helps.

Yes, most villas allow rooftop dishes; they usually give the best line-of-sight. Make sure the mount is securely fixed, use weather-resistant hardware, and route the coaxial cable safely to avoid tripping or water ingress. Always check any community rules before installation.

You can buy original StarSat receivers directly from GloriousStore.com or from authorized StarSat dealers in the UAE. Buying from verified sellers protects you from counterfeit models and ensures firmware updates and warranty support.

On balconies you are limited by direction and space. Mount the dish where you have clear line-of-sight to the satellite (no walls or other balconies blocking the view). Use a sturdy balcony mount, then align step-by-step: azimuth, elevation, and LNB skew using the receiver’s signal meter or a satfinder.

Most Indian channels for UAE viewers are delivered via IPTV or specific satellite platforms. A hybrid receiver with strong IPTV performance, such as StarSat 4K Android models or Mediastar Android series, is recommended to access high-quality Indian content reliably.

A good 4K receiver in UAE should support DVB-S2X, HEVC/H.265, 4K@60Hz output, and hybrid IPTV. StarSat SR-260H4K, SR-9090 Extreme, and similar 4K models from Mediastar and Tiger are among the top options for UAE customers who want both satellite and IPTV.

Stable IPTV in UAE depends on both receiver hardware and software. Android-based StarSat, Mediastar, and Tiger 4K models with strong CPUs, good RAM, and updated apps work best. A wired LAN connection and good internet (e.g., Etisalat/DU fiber) are also essential for stability.

Local markets sometimes offer mixed stock with varying quality and warranty. Buying from GloriousStore ensures you receive genuine StarSat and branded products, clear model specifications, invoice, UAE-wide delivery, and after-sales support through WhatsApp and phone.

StarSat is one of the leading brands in UAE because of its strong tuner sensitivity, frequent firmware updates, and good compatibility with local installers. Whether it’s the best depends on your needs; some customers prefer Mediastar or Tiger for IPTV features, while others prefer StarSat for satellite stability.

No single receiver “supports” satellites by region; support depends on tuner standard (DVB-S2/S2X) and firmware. Any modern DVB-S2/S2X receiver with blind scan can work with popular UAE satellites like Nilesat, Arabsat/Badr, Yahsat, and Hotbird as long as the dish and LNB are correctly aligned and cabled.

Receivers that tolerate rooftop heat and handle edge-of-footprint satellites perform best in Dubai. Models like StarSat SR-260H4K, SR-9090 Extreme, and similar Mediastar/Tiger 4K units are known for strong tuner sensitivity and reliable operation in Dubai apartments and villas.

For UAE users, the best satellite receiver is one that handles weak Nilesat beams, high temperatures, and supports IPTV. High-end StarSat Extreme series, Mediastar 4K models, and premium Tiger receivers are popular because they combine strong tuners, HEVC/H.265, and stable IPTV apps.

To receive updates on promotions, coupon codes, new models, and special offers, you can subscribe to our email newsletter and follow our official social media profiles (Instagram, TikTok, Facebook, etc.).

Yes, we can provide digital gift cards or vouchers that can be redeemed on GloriousStore.com for eligible products. Gift cards are ideal if you want the recipient to choose their own satellite receiver, TV, or accessory.

You can contact our customer service by WhatsApp, phone, or email using the details shown on the Contact page. Our team is available most days of the week to help with product questions, installation guidance, order support, and after-sales service.

Yes, we can ship to selected countries outside the UAE. International orders may have different courier options, transit times, and costs. Customs duties, VAT, or import taxes (if any) are the responsibility of the buyer. Contact us if you need a shipping quote for your country.

If you receive a wrong, damaged, or defective product, you can request a return within the specified return window (usually 7–14 days from delivery) as long as the item is unused, in original condition, and with all accessories and packaging. Some items such as heavily used accessories or hygiene-sensitive products may be non-returnable. Please see our Returns Policy for full conditions.

We process orders quickly, so changes are time-sensitive. If you need to edit the address, change items, or cancel, contact our support team immediately by WhatsApp or email with your order number. If the order is not yet packed or shipped, we’ll do our best to update it; once shipped, modifications are no longer possible.

We offer fast delivery across the UAE and selected international destinations. Shipping fees and delivery time depend on your location, product weight/size, and shipping method (standard or express). Large items like TVs or appliances may need extra handling time. Full details are available on our Shipping Information page.

After your order is shipped, we send you a tracking link by email or WhatsApp. You can click that link to see real-time status from the courier. If you created an account, you can also log in to GloriousStore.com and check tracking from the “My Orders” section.

We accept major credit and debit cards (Visa, Mastercard, etc.) as well as secure online payment gateways. For UAE customers we may also support cash-on-delivery or bank transfer on selected orders. Available options are shown clearly during checkout.

Pakistani channels can be received via Yahsat or IPTV. For dish reception, use a receiver with sensitive tuner and good blind-scan; for IPTV, choose a hybrid Android receiver with stable apps and enough processing power. GloriousStore can recommend specific models based on your dish size and location.

The best hybrid box in UAE is one that offers DVB-S2/S2X tuner, strong CPU, ample RAM, HEVC support, and Android or Linux apps for IPTV. StarSat Extreme 4K hybrids and similar Mediastar/Tiger Android receivers are popular because they combine dish, IPTV, and media playback in one device.

Yes, as long as you buy from reputable websites with clear contact details, UAE address, and warranty policy. GloriousStore.com is based in Dubai and provides genuine StarSat products, official invoices, and secure payment gateways, which makes online buying safe and convenient.

Common reasons include slightly wrong elevation/azimuth, incorrect LNB skew, poor-quality or water-damaged coaxial cable, undersized dish, or LNB aging from heat. A small physical adjustment of 1–2 degrees or replacing old cabling often increases signal quality significantly.

To align for Nilesat 7W, set the elevation close to the calculated angle for Dubai (around mid-height above the horizon), point the dish roughly southwest, then slowly fine-tune azimuth and elevation while watching the receiver’s signal quality on a strong Nilesat frequency. Finally adjust LNB skew for maximum quality and tighten all bolts.

Local satellite technicians and some electronics shops in Sharjah offer full installation services. GloriousStore can also connect you with trusted partners who install and align dishes in Sharjah and nearby emirates.

Most popular satellites for UAE (like Nilesat 7W and Badr/Arabsat 26E) are located toward the southwest or south-southwest sky from Dubai and other emirates. Exact azimuth and elevation depend on your city and satellite; installers use tools or apps to calculate precise pointing angles.

Installation cost depends on dish size, cable length, mounting difficulty, and emirate. Typical pricing in Dubai starts from a basic fee for standard balcony or rooftop installation, with extra charges for long cable runs, wall brackets, or complex routing. For an exact quote, share your building details with the installer.

You can contact professional installers or GloriousStore support to schedule dish installation. A technician will visit your location, recommend dish size and placement, install the dish and LNB, run coaxial cable, configure the receiver, and test signal quality before handing over.

DU and Etisalat provide internet and IPTV but cannot block physical satellite RF signals received directly by your dish. However, they can filter or throttle internet-based IPTV streams. Any perceived ‘blocking’ of satellite channels is usually due to footprint changes or encryption, not telecom operators.

Most Yahsat beams cover the region well, but certain transponders or spot beams may have less power in your specific city or building orientation. Obstructions, dish size, and slight misalignment can make Yahsat appear weaker compared to Nilesat or Badr.

For Pakistani channels on satellites like Yahsat, use a high-quality, low-noise universal LNB with good LO stability. Because some transponders are weaker, a sensitive LNB combined with a correctly sized and aligned dish (often 90–120 cm) provides better stability.

Yes. Dust, sand, and suspended particles increase attenuation of Ku-band signals and can partially coat the dish surface, reducing reflectivity. During strong sandstorms you may experience temporary signal loss; cleaning the dish and LNB cover afterwards helps restore performance.

Extreme heat causes expansion of metal parts and can shift the dish focus by a small amount. LNBs also experience LO frequency drift at high temperatures. Together with increased noise in the coaxial cable, this can push marginal signals below the lock threshold. Using a desert-rated LNB and very precise alignment reduces this issue.

For Dubai high-rise apartments, a 100–120 cm solid dish with a rigid mount is ideal for Nilesat and common regional satellites. High wind and building reflections make small dishes unstable, so a larger dish with solid bracket and quality LNB gives more reliable signal.

Hotbird’s main beams are targeted toward Europe and parts of MENA. In the UAE, the signal is much weaker, and many transponders are below the practical reception threshold unless you use a very large dish (often 150–180 cm or more). For most homes, it is not practical to rely on Hotbird with a small balcony dish.

Nilesat’s main beam is centered over Egypt and North Africa, so the UAE sits near the weaker outer coverage zone. This makes signal levels lower, particularly for HD and low-FEC transponders. Dish size, LNB quality, cable loss, and thermal drift in hot weather can further reduce the margin.

Because UAE is on the edge of the Nilesat footprint, a minimum 100–120 cm dish is recommended for stable reception, especially for HD channels. In some locations or for weaker transponders, a slightly larger dish may provide better rain and heat margin.

For UAE conditions, choose a universal Ku-band LNB with a very low noise figure (0.1–0.3 dB), high LO stability, and UV-resistant housing. Desert-rated LNBs handle extreme rooftop temperatures better and reduce signal drift during the hottest hours of the day.

Free-to-air MBC channels can be received on standard DVB-S2 receivers with the correct dish and frequency. OSN and beIN are subscription-based and usually require official decoders and smart cards; generic receivers cannot legally open their encrypted channels without an authorized subscription device.

To place an order, simply browse the products on GloriousStore.com, choose the item and quantity, then click “Add to cart”. When you’re ready, go to the cart, click “Proceed to checkout”, fill in your delivery details, select payment method, and confirm. You’ll receive an order confirmation by email or WhatsApp once the order is placed.